Sweet16 V2

A macropad from 1up Keyboards: https://1upkeyboards.com/shop/keyboard-kits/macro-pads/sweet-16-v2-macropad-kit/

• Solder paste works great for the SMD components
• The rotary encoder needs to go in first before placing the key plate down
• Test each key after soldering the whole thing and re-flow joints or add solder if the key is not working
• Use a toothbrush with IPA to clean the flux off the board after each step

The SMD RGB LEDs are all blinking like crazy in red and green. I had to turn them off. I'm not sure what I did wrong or if it's a firmware issue.

I used an Elite Pi with the QMK firmware.

• Most of what I need are Basic Keycodes
• Modifier Keys for things like undo and redo
• I made a utility/switcher layer similar to how I configure my Moonlander. Pushing the rotary encoder is TO(1), and on layer 1, the top row of keys is for switching apps. The macropad defaults to Krita.
• The bottom-right key on the macropad is QK_BOOT. Press and hold to get the RPi 2040 to bootloader mode.

• Q - Quick Palette
• Ctrl-Shit-M - Freehand Select

I have a rotary encoder on the right side of the keyboard, If you're using encoder_map, it's the second encoder in the struct.